Particularized ( B/RA(ENB), EIR ,DVB, HQB)

Film Ectaskan B/RA (NB)

designed for registration of diagnostic images, obtained in the optical мультиформатных cameras, which are used as output devices in the computer MRI, digital angiography, medical radiology and ultrasound.

Features
high resolution;
single ортохроматическая emulsion on the blue polyether basis with противоореольным layer on the reverse side;
high контрасность;
sensitivity, adaptable to the phosphorus used in a CRT.
Download
The film should be loaded into the camera in the conditions of the safelight lamp, so that was not a lot of pressure, bending and free, as well as fingerprints, which can damage the emulsion. Place the film in such a way that covered the emulsion side was on the contrary phosphorus (source of light). Emulsion side is marked with the help of tags. When the marker is in the upper right corner, the party with the emulsion is located face-to-operator.

KODAK Ectaskan IR

High-contrast film for infra-red laser printing is used for laser мультиформатных cameras type KODAK Ectascan 1120. This film is intended for records images in medicine with the help of infrared laser at the modulated solid-state diode. This high contrast with a one-layer emulsion and сверхмелким grain film is used especially for recording images from the studies on the computer, magnetic resonance, nuclear-magnetic-resonance tomographs and other complex medical diagnostic facilities.

Features
single ортохроматическая emulsion on the basis of polyether with bluish tint.
excellent diagnostic imaging parts with a cold tone of the image;
high contrast on a background of high density;
the opportunity to achieve play 4096 shades of gray, guaranteed continuity of gradations of tone and provides the direct digital image without such artifacts, such as the underscore the contours;
selection process of the processing in the standard or accelerated cycle of the processors of the new generation.
Film laser
for KODAK Dry View
Film for laser cameras KODAK Dry View is a film of high-resolution, sensitive to the infrared radiation, which processing is possible only in a "dry process". Laser KODAK film Dry View Film is available in a sealed светозащищенных картриждах, which do not require a pre-charge in a dark room. On картриждах suffered a special bar-code and/or rf code to automatically recognize the type of the film and its expiration date and make the automatic calibration of the camera.

Formats used film

35х43 cm (125-sheet in the package);
28х35 cm (125 pages);
20х25 cm (100 sheets).

Conditions of manifestations

Светозащищенные packaging films do not involve direct contact radiographer with undeveloped film, but, if necessary, may work with film in a dark room with a green неактиничным filter.

Recommendations for the storage of undeveloped films:

Background radiation is not more than 90 Micror/h.
Temperature from 4 to 24 C (in the transportation of allowed short-term increase in temperature до35 degrees C).
Relative humidity of 30-60%.
The recommendations for storage shown film:

When first seen on негатоскопе there may be slight (not more than 2%) of the total darkening of the film, not reflected in the information content of the picture. It is not recommended to keep the pictures on the on негатоскопе more than 24 hours.
Long-term (more than 3 hours) stay of the films in a bright light and/or at high temperatures (more than 55 degrees C) may lead to the gradual darkening of the picture.
The film comes out is resistant to moisture, including drops of liquid and high atmospheric humidity.
For prolonged storage, it is recommended to put the tape in protective bags.
At observance of the storage conditions of the films of the original quality maintained for a period of 100 years.
Shelf life

On the film KODAK Dry View Film is set expiration date in 1 year from the date of manufacture.